我欲封天,好看的玄幻小说,盗墓笔记txt全集下载

PRODUCTS

Recommended products

Your current location: ProductsRegulating ValveHigh Pressure Differential - High Performance Angle Regulating Valve

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve

Product overview

Product model: ZJSJ
Nominal diameter: DN20~200mm
Nominal pressure: GB: 1.6~10.0MPa, ANSI: 150~600LB, JIS: 10~40K
Applicable temperature: -200℃-+560℃
Main material: WCB, LCB, WC9, CF8, CF8M, CF3M
Drive mode: pneumatic
Design standard: GB/T17213
Flange standard: GB/T9113, JB/T79, HG20594 and other standards
Inspection standard: GB/T4213
Connection type: flange (FF RF RTJ), welding (SW BW), thread (applicable to less than 1 ")

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve product details

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve overview

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve produced and sold by Baigang valve group with the top of the guide structure, equipped with multi-spring pneumatic actuator. The utility model has the advantages of compact structure, light weight, sensitive action, streamlined fluid channels, small pressure drop loss, large valve capacity, accurate flow characteristics and convenient disassembly and assembly. Widely used in precise control of gas, liquid and other media, process parameters such as pressure, flow, temperature, liquid level at a given value. Especially suitable for small amount of leakage before the valve pressure difference is not large after the high viscosity, containing suspended solids and particulate matter regulation, to avoid coking, clogging, easy self-cleaning and cleaning occasions. This series of products are room temperature type, regulation cut off, bellows sealed, high temperature, thermal insulation jacket and other series. Nominal product pressure rating PN10, 16,25,64,100; body diameter range DN20-DN200. Leakage grade Ⅳ or Ⅵ level. Applicable fluid temperature from -200 ℃ - + 560 ℃ range of a variety of grades, the flow characteristics of linear or equal percentage. A variety of specifications to choose from. This series of control valve structure of new, fully functional, full range.

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve material

Body made of carbon steel					Body made of stainless steel
1	Body	WCB	LCB	WC9	1	Body	CF8	CF8M	CF3M
2	Seat	304	304	304	2	Seat	304	316	316L
3	Spool	304	304	304	3	Spool	304	316	316L
4	Guide sleeve	304	304	304	4	Guide sleeve	304	316	316L
5	cap	WCB	LCB	WC9	5	cap	CF8	CF8M	CF3M
6	Valve stem	304	304	304	6	Valve stem	304	316	316L
7	filler	PTFE / flexible graphite			7	filler	PTFE / flexible graphite
8	spring	65Mn			8	spring	65Mn
9	Nut	304	304	304	9	Nut	304	316	316L

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve note

Note: Normal temperature type: room temperature type operating temperature -20 - +200 ℃, leak level is Ⅳ level.
High-temperature bonnet additional heat sink can be used for medium temperature -60- +450 ℃ occasions.
Bellows sealed type to move up and down the stem to form a complete seal, blocking fluid leakage.
Low-temperature type with extended valve cover and insulation board structure can be -196 ℃ cryogenic occasions.

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve main technical parameters

Nominal diameter DN (mm)		20	25	32	40	50	65	80	100	125	150	200
Rated flow coefficient KV	straight line	6.9.6	11	17.6	27.5	44	69	100	176	275	440	690
	Equal percentage	6.3	10	16	25	40	63	100	160	250	400	630
Actuator Model	Is the role	ZHA-22		ZHA-23			ZHA-34			ZHA-45
	reaction	ZHB-22		ZHB-23			ZHB-34			ZHB-45
Rated stroke L (mm)		16		25			40			60
Diaphragm effective area Ae (cm2)		280		400			600			1000
Nominal pressure PN (MPa)		1.6 2.5 4.0 6.4 10.0
Inherent flow characteristics		Straight line percentage
Inherent adjustable R		50: 1
Signal range Pr (KPa)		20-60, 20-100, 40-200, 60-100, 80-240
Air pressure Ps (MPa)		0.14, 0.25, 0.28, 0.40
Allow leakage		Ⅵ level
Operating temperature	Normal temperature type	-20 to 200, -40 to 250, -60 to 250
	Cooling type	-40 ~ 450, -60 ~ 450
	High temperature type	450 ~ 560
	Low temperature type	-60 ~ -100, -100 ~ -200, -200 ~ -250

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve main performance parameters

Serial number	project			Standard control valve		Cooling, low temperature control valve
Serial number	project			Without locator	With locator	Without locator	With locator
1	Basic error <(%)			± 5	± 1	± 15	± 4
2	Back to the difference <(%)			3	1	10	3
3	Dead zone <(%)			3	0.4	8	1
4	Always point deviation <(%)	Open air	Start point	± 2.5	± 1	± 6	± 2.5
		Open air	end	± 5		± 15
		Qi off	Start point	± 5		± 15
		Qi off	end	± 2.5		± 6
5				± 2.5	+2.5	+6	+2.5

ZJSJ High Pressure Differential - High Performance Angle Regulating Valve dimensions

DN		20	25	32	40	50	65	80	100	125	150	200
L	PN16 / 25	95	100	105	115	125	145	155	175	200	225	275
	PN40	95	100	105	115	125	145	155	175	200	225	275
	PN64,100	115	115	130	130	150	170	190	215	250	275	325
H		349	350	358	378	393	494	503	521	634	696	715
H1		444	445	458	478	492	594	628	646	759	846	915
H2		419	423	445	478	490	582	624	620	759	840	905
H3		180	180	180	180	180	236	236	236	310	310	310
A		282	282	282	282	282	360	360	360	470	470	470
C		220	220	220	220	220	270	270	270	320	320	320
L1		289	289	289	289	289	347	347	347	476	476	476
Pressure Level		GB: 1.6, 2.5, 4.0, 6.4, 10.0 MPa ANSI: 150, 300, 600 LB JIS: 10, 20, 30, 40K
Execution agency		ZHB-22			ZHB-23		ZHB-34			ZHB-45

Reminder:

All text, data and pictures in this article are for reference only.To see more details of the ZJSJ High Pressure Differential - High Performance Angle Regulating Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

Next：Pneumatic Film Low Temperature Regulating Valve

Previous：Pneumatic Bellows Regulating Valve